Interior Decorative Wall Panels Germany: How to Make Panels Feel Built-In, Not Added On

There's nothing worse than a gorgeous looking wall panel that doesn't fit into an apartment, hotel or office.

Typically, the panel is not at fault.

The only problem is it was chosen as a decorative piece and not part of the room's architecture.

For those buyers who are looking for Interior Decorative Wall Panels Germany, it is significant. Colour and texture are just the first two things. Whether or not the final wall is felt as intentional is dependent on the proportion of the panel, lighting, acoustics, indoor-air considerations and installation and surrounding materials.

Decorative doesn't necessarily have to mean more decoration.

The room has doors, floors, lighting, furniture, switches and likely a variety of materials.

Poor surface may be enhanced by another strong surface, or just an additional surface to consider.

The first step is to determine what the wall is going to be the focus of.

If it is intended to be a subdued backdrop to a bed, meeting table or reception desk, a tame wood-looked surface might suffice. Offered in wood-look and contemporary finishes, HSCS WPC Wall Panel Interior features interlocking installation and can be used for residential and commercial interiors.

When the wall is intended to be the focus point, it may be appropriate to have a deeper relief. The wave, geometric and other sculpted profiles of 3D Wall Cladding Panels provide more pronounced light and shadow effects.

The key to an important decision is background or focal wall?

Clear One Job to the Wall

For decorative panels a reason is good.

In a living room, they might be a focal point for the TV or seating area. In the hotel they can set up the reception. If you have a meeting room in an office, a slatted wall could break up the space, making it less hard. Panels in corridors can just be used for a finished surface, that is both durable and cleanable.

All of these problems start when the one wall wants to be Timber Feature, Acoustic Treatment, Geometric Sculpture and Branding Background all at once.

A helpful rule of thumb is that:

A first goal then additional benefits.

This typically yields a smoother end result, and simplifies the product specification.

The genre of the panel is more important than the sample colour.

People are tempted to take a closer look at sample boxes. Rooms and areas are experienced after finishing from several metres distance.

That changes what matters, that's the change.

A 10 cm wood sample provides you with information on colour. It is virtually useless in predicting the appearance of twenty vertical joints over a 6-metre wall.

Before approving, examine the entire elevation for its finish for Interior Decorative Wall Panels Germany. Check out details like panel lines on doors, shelving, windows and ceiling.

In some cases, a change of the panel layout by 30 or 50 mm can result in a cleaner wall than a change in the product.

This is especially critical when using grooves and slats. Once the area of repetition is several square metres, it is called architecture.

Acoustic comfort can be the difference between a surface or not.

Rooms that have visually clean hard floor, glass, plaster and large windows can be acoustically uncomfortable.

This is where decorative surfaces can play a second part.

HSCS Solid Wood Slat Wall Panel adopts the slatted profile to disperse sound, and can be combined with acoustic backing in case of more soundproofing requirements.

But not all slatted walls are necessarily a 'solution for acoustics'.

If sound performance is a criteria in the specification, request real acoustic construction data for meeting rooms, open offices, restaurants or hospitality spaces. Decorative Grooves is not a tested acoustic assembly.

It is a distinction which it is desirable to make at an early stage.

The Product Brief is amended to reflect the changes to the product as a result of the renovation.

It is not necessary to use the same panel system in new build interiors to renovation projects.

During refurbishment the existing wall might be painted, tiled or uneven and have services installed. In addition to the cost of the panel, it is costly to shut down a hotel corridor or commercial room for several days.

Prefinished systems are interesting as they can help to minimise wet trades and painting and finishing operations.

When speed of wall renewal is a project requirement, HSCS WPC Integrated Wall Panel offers a complete wall panel construction in one piece with a finished decorative surface, and is installed using either interlocking or concealed methods.

Make sure to check the current substrate before selecting one.

“Fast installation” is of no avail if the wall to be installed the panel behind is not appropriate to the fixing method proposed.

Ask About the Air, Around the Panel Too in Germany

Materials used in interior are utilized for years within used rooms.

Hence, talk about emissions should occur prior to a big purchase, particularly if panels are going to be placed on a significant portion of the wall.

Germany's Federal Environment Agency mentions the potential for building products to emit pollutants, like VOCs, into indoor air and advises consumers to look for low-emission materials and methods of assessment, like AgBB.

Therefore, don't simply use terms like “eco-friendly”.

Inquire about what the actual material of the panel, surface film, back and adhesive is. Next ask for the emissions paperwork pertaining to the project.

Sometimes a simple technical sheet might be more useful than a nice finish catalogue.

Before undergoing final finish approval, a fire classification will be completed.

There's an extra level with commercial interiors.

The EU Construction Products Regulation (CPR) introduces harmonised rules which give a harmonised framework to declare the performance of construction products and to CE mark construction products if appropriate. EN 13501-1 is a classification that is frequently referenced in reaction to fire.

HSCS provides Fire Resistant PVC Wall Panels which can be made with a variety of fire performance options, such as B-s2,d0 listed for the product.

However, in a commercial project, such as a German hotel, the project team should determine the necessary classification in the first place.

Next ensure that the report being provided is the correct one for the panel material and construction being ordered.

Don't give the go ahead for the colour and enquire about fire documentation later.

Check out the wall in the real room.

The last pitfall, and probably the most common, is approving decorative panels under only showroom and/or office lighting.

Bring the sample to the project, if possible.

Stand in the same position that a visitor would stand. Examine in daylight. Switch on the last of the lights. Display it in the vicinity of the flooring, door finish and furniture material.

Then step back.

If the panel continues to operate after taking the focus away from it, the selection is likely to be to fit in with the room, and not to stand out.

It's a good finishing touch for Interior Decorative Wall Panels Germany.

Final Selection Check

Prior to ordering, there are five basic questions you should pose:

• Is this wall Quiet or Dominant?
• Does rhythm of the panel play through the full elevation?
• Does acoustic performance really need to be specified?
• Is the existing wall able to accommodate the proposed wall?
• Do emissions and/or fire documents need to be considered for the project?
• The most popular decorative wall panel in the sample room may not be the best.

Many times it's the one that you don't even notice because it creates a sense of resolution in the interior space.

FAQ

Q1. What are the right decorative wall panels for modern German interior?

Wood-look WPC, slatted panels, restricted 3D-profiles and matte surfaces are all good options. It's not about one fashion, but more about the function of the space and the materials that are around it.

Q2. Can decorative wall panels be used for the renovation projects?

Yes. Prefinished and interlocking can minimise painting and wet finishing but care needs to be taken to ensure that the existing substrate does not need to be checked first.

Q3. Do decorative wall panels make a difference on acoustics of the room?

There are systems available which are either slatted or acoustically backed that can help to control echo. Ask for actual construction and performance data, not just by appearance on the surface for acoustic performance.

Q4. Does Germany consider low emission wall panels to be a significant factor?

VOC emissions can also be generated from indoor building products so it is good to have emission documentation, especially for large wall areas.

Q5. How do I know what type of fire rating to look for in decorative wall panels?

Classification of the reaction-to-fire of construction products in Europe is mainly carried out according to EN 13501-1. The necessary classification should be decided for the particular project.